|
| |
W&H Systems, Inc.
   
 Accuglide Plus Transportation -
 T/C Chain Powered
-
 Line Shaft-
 V-Belt Live Roller
Accuglide Plus
Transportation
 | Technical |
 |
Rollers - 1.9’ diameter at 2", 3",4" or
6" centers |
|
Beds - 16", 22", 28", 34", 40"
widths |
6-3/8" deep side frames
Lengths furnished in 6’, 9’ and 12’
sections
|
Power Transmission - RC50 chain with urethane driver |
|
Minimum Height - 18" to top of roller |
|
Take-Up / Tension - Automatic |
|
Electrical Requirements - 230/460 volts, 3 phase, 60 hz
|
| Operational |
|
Operation Modes - Transportation or Accumulation |
|
Capacity - Up to 100 lbs. per linear foot |
|
Speed - 60 to 320 fpm |
|
Minimum Load - Approx. 8 oz. to activate sensor |
|
Release Modes - (1) Singulation (2) Auto-Slug (3) Full Slug |
|
Accumulation Zones - 36" long |
|
Accumulation Technique - Sensor / air valve actuation |
|
Required air supply - 15 psi |
T/C Chain Powered Roller
| Technical |
|
Rollers - 1.9’ diameter at 2", 3",4" or
6" centers |
|
Beds - 16", 22", 28", 34", 40"
widths |
5" deep side frames
Lengths up to 12’ sections
|
Power Transmission - RC40 chain with urethane drive sheel
threads |
|
Minimum Height - 12" to top of roller |
|
Take-Up / Tension - Automatic |
|
Electrical Requirements - 230/460 volts, 3 phase, 60 hz |
| Operational |
|
Operation Modes - Transportation |
|
Capacity - Up to 100 lbs. per linear foot |
|
Speed - 45 to 240 fpm |
Line Shaft
| Technical |
|
Rollers - 1.9’ diameter at 3",4" or 6"
centers |
|
Beds - 16", 22", 28", or 34" widths |
5-1/2" deep side frames
Lengths furnished in 1’ to 10" sections
|
Curves - 30°, 45°, 60°, and 90° |
|
Spurs - 30°, 45° RH or LH |
|
Merge - 30° RH or LH |
|
Drive Shaft - 1" diameter steel shaft, full length of
bed section. |
Delrin chain coupling at bed joints.
|
Drive Spools - 2" diameter Delrin held in place by
snap-on retaining clips. |
|
Drive Belts - 3/16" diameter urethane drive belts |
|
Electrical Requirements - 230/460 volts, 3 phase, 60 hz |
| Operational |
|
Operation Modes - Transportation or Low Pressure
Accumulation, |
Zero Pressure Accumulation (optional)
|
Capacity - 15 lbs. per roller,100 lbs. per carton |
|
Speed - 30 to 120 fpm |
V-Belt Live Roller
| Technical |
|
Rollers - 1.9’ diameter at 2" or 3" centers |
|
Beds - 16", 22", 28", 34" or 40"
widths |
10" deep side frames
Lengths furnished in 1’ to 10" sections
|
Straight Sections - Lengths 38" to 128" in 1"
increments |
|
Curves 2’,6" IR and TT - 30°, 45°, 60°, 90°,
and 180° RH or LH |
|
Extensions - Infeed and/or discharge extension split between
infeed & discharge. |
Extensions offered in 1" increments.
|
Spurs - 30° and 45° RH or LH |
|
Spur/Curve - 30° spur/60° curve RH or LH |
45° spur/45° curve RH or LH
90° RH or LH
|
Take-up - Non back bending |
|
Electrical Requirements - 230/460 volts, 3 phase, 60 hz |
| Operational |
|
Operation Modes - Transportation |
|
Capacity - Up to 70 lbs. per foot loads |
|
Speed - 90 to 400 fpm |
 Send mail to dbetman@whsystems.com with questions or
comments about this web site.
Copyright © 1998 W&H
Systems Inc.
Last modified: July 07, 2003
|
